Adaptec 29320A-R User Guide - Page 118
Using a CD with NetWare, Optimizing Performance - firmware
UPC - 760884155226
View all Adaptec 29320A-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Installing the SCSI Driver for Novell NetWare Using a CD with NetWare NetWare 5.x and 6.x To use a CD with NetWare 5.x and 6.x: 1 Load adpu320.ham by entering the following line: :load [pathname]adpu320 2 The scsicd.cdm driver will auto-load if the device(s) are detected. 3 Type the following line at the prompt: :load CDROM.NLM Optimizing Performance The Adaptec Ultra320 SCSI Bus Master firmware increases the SCSI performance of the Adaptec Ultra320 host adapters under multitasking environments. The firmware uses a paging mechanism to handle up to 255 simultaneous SCSI commands. The sequencer can simultaneously manage up to 128 tagged, or 1 nontagged, SCSI commands for each SCSI device, up to a limit of 255 SCSI commands. The firmware can queue as many commands as the operating system is able to send to the host adapter. To set this feature, enter the following command: max_tags=n In general, a low number of max_tags gives better sequential performance, and a high number a better random performance. Note: A large number of max_tags can also cause starvation problems leading to deactivation with some drives. 10-9