Adaptec 29320A-R User Guide - Page 176
Migrating With Windows 2000
UPC - 760884155226
View all Adaptec 29320A-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Adaptec Ultra320 SCSI Cards User's Guide Migrating With Windows 2000 Installing the HostRAID Driver To migrate the boot channel on a SCSI card from SCSI to HostRAID with a Windows 2000 operating system, follow these steps: 1 Start Windows 2000. 2 Go to the Device Manager by clicking on Start=>Settings=> Control Panel=>System=>Hardware=>Device Manager 3 At the Device Manager, click the + sign next to the SCSI and RAID controllers entry to expand it. 4 There will be two entries representing the dual channels. Right-click on the channel that you are booting from, then select Properties. Note: If you are not sure which channel your boot drive is connected to, change the view of the Device Manager to View Devices by connection, and find out which drives are connecting to which channels. 5 Select Driver, then Update Driver. 6 Click Next. 7 Select Display a list of the known drivers for this device so that I can choose a specific driver, then click Next. 8 Click the Have Disk button. 9 Insert the Adaptec Installation CD into the CD-ROM drive. If the CD automatically opens a welcome screen, click the Exit button to close it. 10 At the Install from Disk window, click the Browse button and path D:\drivers\windows\win32 (where D: is the CD-ROM drive letter). Click Open. 11 Click OK. 12 Scroll down the list and select your Adaptec HostRAID RAID driver, then click Next. 13 Click Yes when the Update Driver Warning message appears. E-2