Adaptec 29320A-R User Guide - Page 113

Adaptec Ultra320 SCSI Cards User's Guide Loading the Driver at Server Bootup To automatically load the adpu320.ham at server bootup, the startup.ncf file (usually located in your server's startup directory) must contain a load command line that specifies the location of the driver and any appropriate command line options (see Using the Load Command Line Options on page 10-5). For additional information on the startup.ncf file, refer to your NetWare documentation. The correct syntax to load the driver is: load [pathname]adpu320.ham [options] For example, the command line to load the driver from the c:\nwserver directory, with the verbose= option on is: load c:\nwserver\adpu320 verbose=y Command line options are not case sensitive. Placing commas between command line options is optional. See Using the Load Command Line Options on page 10-5 for possible values. To modify the startup.ncf file, type load nwconfig and press Enter. Note: You can also use your DOS text editor to modify the startup.ncf file. 10-4