Adaptec 29320A-R User Guide - Page 193
Channel B, Start=>Settings=>Control Panel, SCSI Adapters, Drivers, Remove
UPC - 760884155226
View all Adaptec 29320A-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Adaptec Ultra320 SCSI Cards User's Guide 13 Press Esc, save change, then exit. If you are using a dual channel card, select Channel B and repeat the steps to disable HostRAID support. Completing the Adaptec Ultra320 SCSI Driver Installation After you have installed the Adaptec Ultra320 SCSI driver and disabled HostRAID support, complete the installation by following these steps: 1 Restart Windows NT 4.0. You may receive the following Service Control Manager error: At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details. To prevent this error from reoccuring during subsequent restarts, Click on Start=>Settings=>Control Panel and double-click the SCSI Adapters icon. 2 Click the Drivers tab, select the Adaptec HostRAID RAID driver, and click Remove. 3 When the message Are you sure you want to remove this drivers? appears, Click Yes and restart the system. F-10