Bernina Bernette 56 Instruction Manual - Page 69

Set the pattern selection dial to the Straight Stitch. Set the stitch

Get Bernina Bernette 56 PDF manuals and user guides View all Bernina Bernette 56 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

A •••e•••• NOTE: After selecting the pattern, set the stitch width dial to 2.5 to select the B center needle position. The zipper foot is used to sew various types of zippers and can easily be positioned on the right or left side of the needle . When sewing the right side of the zipper, attach the presser foot holder to the left pin on the zipper foot. When sewing the left side of the zipper, attach the presser foot holder to the right pin on the zipper foot. (See fig. A.) 1. Set the pattern selection dial to the Straight Stitch. Set the stitch length between "2" and "3". 2. Lower the presser foot lever and attach the presser foot holder to either the left or right pin on the zipper foot. 3. Fold the edge of the material 2 em (3/4") and place the zipper un~ der the folded portion. 4. For the 60, 70 and 75, use the stitch width dial to adjustthe needle position. Lower the needle into the notch on either the left or right side of the zipper foot. •• 5. Se~ from the bottom of the zipper toward the top on both sides. • The needle should be positioned on the zipper side of the foot for • best results. (See fig. B.) •• 6. To sew the opposite side of the zipper, release • the foot by raising the lever located at the back of the presser foot, • move the zipper foot to the other side of the zipper, and continue • sewing using the other side notch . •• 0) Zipper foot • ® Right pin for sewing the left side of the zipper • ® left pin for se:wing the.right side of the zipper •• Check for correct needle setting. •• The·wrong setting can cause the needle to break. 1. Set the pattern selection dial to the Straight Stitch. • 2. Loosen the tension of the upper thread (to about "2"} so that the •• lower thread lies on the underside of the material. • 3. Sew a single row or multiple rows of straight stitches. 4. Pull the lower thread{s) to gather. the material. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
61
A
B
•
•
•
•
•
e
•
•
•
•
•
•
NOTE:
•
After selecting the pattern, set the stitch width dial to 2.5 to select the
•
center needle position.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The zipper foot
is
used
to
sew various types
of
zippers and can easily
be
positioned
on
the right or left side of the needle .
When
sewing the right side
of
the zipper, attach the presser
foot
holder
to the left pin on the zipper foot. When sewing
the
left
side
of
the
zipper, attach the presser foot holder to the right pin
on
the zipper foot.
(See
fig.
A.)
1. Set the pattern selection dial to the Straight Stitch. Set the stitch
length between "2" and "3".
2.
Lower the presser foot lever and attach the presser foot holder to
either the left
or
right pin on the zipper foot.
3. Fold the edge
of
the material 2 em (3/4") and place the zipper
un~
der the folded portion.
4.
For the 60, 70 and 75, use the stitch width dial
to
adjustthe needle
position.
Lower the needle into the notch on either the left
or
right side
of
the
zipper foot.
5.
Se~
from the bottom
of
the zipper toward the top on both sides .
The needle should
be
positioned on the zipper side
of
the foot for
best results.
(See
fig.
B.)
6. To
sew
the
opposite
side
of
the
zipper,
release
the foot by raising the lever located at the back
of
the presser foot,
move the zipper foot to the other side
of
the zipper, and continue
sewing using the other side notch .
0)
Zipper foot
®
Right pin
for
sewing the left side
of
the zipper
®
left
pin for se:wing the.right side of the zipper
Check for
correct
needle setting.
The·wrong setting
can
cause
the
needle to break .
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.
Set
the pattern selection dial to the Straight Stitch .
2.
Loosen the tension
of
the upper thread (to about
"2"}
so
that the
lower thread lies on the underside
of
the material.
3.
Sew a single
row
or
multiple
rows
of
straight stitches .
4.
Pull the
lower
thread{s)
to
gather. the material.