Brother International HL-2170W Network Users Manual - English - Page 18
Using other methods to con your printer for a network, Uncon d, STATIC, Boot Method - default ip
UPC - 012502619468
View all Brother International HL-2170W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
c Double-click the unconfigured device. Windows® Configuring your printer for a network Macintosh® 2 Note • If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the device will appear as Unconfigured in the BRAdmin Light utility screen. • You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing the Printer Settings Page on page 100. d Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of your print server. Windows® Macintosh® e Click OK. f With the correctly programmed IP address, you will see the Brother print server in the device list. Using other methods to configure your printer for a network 2 You can configure your network printer using other methods. See Other ways to set the IP address (for advanced users and administrators) on page 120. 11