Brother International Innov-ís 1200 Users Manual - English - Page 161

LCD button When a specific pattern is selected, press this key and then, press to switch the display. The sewing settings such as the specified alphabet character string and color are confirmed. The needle progresses one color or one stitch (if pressed continuously, 9 stitches to 20 stitches) at a time and changes the position for starting the embroidery. This is used when a specific color is not sewn or when restarting the sewing machine after power has been turned off in the middle of the operation. Press this key to change the thread settings. Press this key to select or cancel programmed thread cutting. Press or tension. to adjust the thread Press or to change the thread density (character patterns only). Press this key to adjust the pattern. Press this key when you want to change the color character by character in character embroidery. Since the sewing machine stops at the end of each character, the upper thread is changed as you sew. Press this key again to cancel multi-color. Back one Forward 4 color one color Back one stitch Forward one stitch • For details, refer to "Resewing" (page 172). The position of the pattern within the embroidery frame can be checked, and the size and angle can be changed. • For details, refer to "Adjusting the layout" (page 169). Memo z Keys that appear surrounded with a dotted line cannot be used. Selecting Embroidery Patterns 159