Brother International Innov-ís 1200 Users Manual - English - Page 65

Turn the presser foot pressure dial at the back b of the machine to adjust the pressure of the presser foot. The presser foot pressure can be set to one of four levels (between 1 and 4). The larger the setting, the stronger the pressure. Use setting 1 or 2 for thick fabrics, use setting 3 or 4 for thinner fabrics. 1 2 When you encounter a seam that is too thick a to feed under the foot, raise the presser foot lever. Press the black button (presser foot holding b pin) on the left side of zigzag foot "J". Keep the button held in and lower the presser foot. 1 2 a Strong b Weak When you are finished sewing, reset the dial to c 3 (standard). Sewing thick fabrics ■ If the fabric does not fit under the presser foot If the fabric does not fit easily under the presser foot, raise the presser foot lever even higher to bring the presser foot to its highest position. a Presser foot holding pin Note z The presser foot needs to be in a level position before pressing the black button (presser foot holding pin) on the left side of zigzag foot "J". Release the button. The foot will lock in place c level with the seam, allowing the fabric to feed. ■ If thick seams are being sewn and the fabric does not feed at the beginning of stitching Zigzag foot "J" is equipped with a feature that keeps the presser foot level. a X Once the trouble spot has been passed, the foot will return to its normal position. CAUTION ● If fabric more than 6 mm (15/64 inch) thick is sewn or if the fabric is pushed with too much force, the needle may bend or break. a Sewing direction Useful Sewing Tips 63