Brother International Innov-ís 1200 Users Manual - English - Page 62
Automatically cutting the, thread
View all Brother International Innov-ís 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
SEWING BASICS Automatically cutting the thread Set the fabric in place, and press d Stop" button) once. ("Start/ The sewing machine can be set to automatically cut the threads at the end of the stitching. This is called "programmed thread-cutting". If programmed threadcutting is set, automatic reverse/reinforcement stitching is also set. Turn on the sewing machine. a X The LCD comes on. Select a stitch. b • For details on selecting a stitch, refer to "Selecting stitching" (page 49). Press c on the screen. 1 a "Start/Stop" button X Stitching starts after reverse stitching or reinforcement stitching. Once you have reached the end of the e stitching, press ("Reverse/Reinforcement Stitch" button) once. If stitching, such as buttonholes and bar tacking, that includes reinforcement stitching has been selected, this operation is unnecessary. X After the reverse stitching or reinforcement stitching has been done, the sewing machine stops, and the thread is cut. X You get , and the sewing machine is set for programmed thread-cutting and automatic reverse/reinforcement stitching. • To turn programmed thread cutting off, press . The thread is cut here. Memo z Reverse/reinforcement stitches WILL NOT be sewing and the thread will not automatically be cut until ("Reverse/ Reinforcement Stitch" button) is pressed. ("Start/Stop" button) may be pressed to stop stitching when needed such as for pivoting corners. z If the power is turned off, programmed thread-cutting will be turned off. 60