Brother International Innov-ís 1200 Users Manual - English - Page 92
When opening the buttonhole with the, seam ripper, do not place your hands in, the cutting direction
View all Brother International Innov-ís 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
UTILITY STITCHES Pull down the buttonhole lever as far as f possible. Insert a pin along the inside of one bar tack at j the end of the buttonhole stitching to prevent the stitching from being cut. 1 a a Buttonhole lever The buttonhole lever is positioned behind the bracket on the buttonhole foot. 1 a Pin Use the seam ripper to cut towards the pin and k open the buttonhole. 2 a Buttonhole lever b Bracket Gently hold the end of the upper thread in g your left hand, and then start sewing. 1 a Seam ripper For keyhole buttonholes, use the eyelet punch to make a hole in the rounded end of the buttonhole, and then use the seam ripper to cut open the buttonhole. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. Raise the presser foot lever, remove the fabric, h and then cut the thread. Raise the buttonhole lever to its original i position. 1 a Eyelet punch • When using the eyelet punch, place thick paper or some other protective sheet under the fabric before punching the hole in the fabric. CAUTION ● When opening the buttonhole with the seam ripper, do not place your hands in the cutting direction, otherwise injuries may result if the seam ripper slips. 90