Brother International Innov-ís 1200 Users Manual - English - Page 27
Pass the thread under the hook on the thread
View all Brother International Innov-ís 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Memo z When sewing with fine, cross-wound thread, use the small spool cap, and leave a small While holding the thread near the spool with h your right hand, as shown, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. space between the cap and the spool. 1 1 cb a a Spool cap (small) b Spool (cross-wound thread) c Space z When using thread that winds off quickly, such as transparent nylon thread or metallic thread, place the spool net over the spool before placing the spool of thread onto the spool pin. If the spool net is too long, fold it to fit the size of the spool. z When the spool net is used, the tension of the upper thread will slightly increase. Be sure to check the thread tension. For details, refer to "Adjusting the thread tension" (page 57)". 1 2 a Thread guide cover Pass the thread under the thread guide plate, i and then pull it to the right. 1 a Thread guide plate Pass the thread under the hook on the thread j guide, and then wind it counterclockwise under the pretension disk. 1 3 4 a Spool net b Spool c Spool cap 1 d Spool pin a Thread guide and pretension disk Note z Make sure that the thread passes under the pretension disk. Winding/Installing the Bobbin 25