Brother International Innov-ís 1200 Users Manual - English - Page 97
When using zipper foot I, be sure
View all Brother International Innov-ís 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Align the seam with the center of the zipper, e and then baste the zipper in place. Select stitch 3 . h 2 1 3 • For details, refer to "Selecting stitching" (page 49). a Wrong side of fabric b Basting stiching c Zipper CAUTION ● When using zipper foot "I", be sure to Remove about 5 cm (2 inches) from the end of f the basting on the outside. select the straight stitch (center needle position), and slowly turn the handwheel toward you (counterclockwise) to check 3 2 4 that the needle does not touch the presser foot. If a different stitch is selected or the 3 1 needle hits the presser foot, the needle may bend or break. a Wrong side of fabric b Zipper basting c Outside basting d 5 cm (2 inches) Attach the presser foot holder to the right pin g of zipper foot "I". 1 I Topstitch around the zipper. i 1 3 2 4 2 a Pin on the right side b Needle drop point • For details, refer to "Replacing the presser foot" (page 42). a Stitching b Right side of fabric c Basting stitching d End of zipper opening CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Remove the basting stitching. j Zipper Insertion 95