Brother International Innov-ís 1200 Users Manual - English - Page 191

Error Message Probable Cause When the embroidery unit is attached. You tried to set a number of characters that will not fit within the frame. The upper thread has become tangled around the bobbin case, and the needle is bent and hitting the needle plate, etc., so the sewing machine stops (refer to page 182). You tried a function that cannot be used when the embroidery unit is attached. A card that cannot be used with this product has been inserted, and you tried to select a pattern from the card. An embroidery pattern incompatible with this machine was selected. The utility stitch or character stitch key was pressed while the embroidery unit is attached. 5 You try to retrieve a pattern downloaded as one for a different machine. The machine is in embroidery mode and the combined character pattern is too large for the embroidery frame. You can rotate the pattern 90 degrees and continue combining characters. Transmitting by USB The "Start/Stop" button, the embroidery key, or the memory key is pressed in embroidery mode, but the embroidery unit is not attached. The bobbin winder is winding the bobbin. Troubleshooting 189