Brother International Innov-ís 1200 Users Manual - English - Page 99
toward you counterclockwise to check
View all Brother International Innov-ís 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Select stitch 3 . h When you are about 5 cm (2 inches) from the j end of the zipper, stop the sewing machine with the needle lowered (in the fabric), raise the presser foot lever. Open the zipper and continue sewing. k • For details, refer to "Selecting stitching" (page 49). CAUTION ● When using zipper foot "I", be sure to select the straight stitch (center needle position), and slowly turn the handwheel toward you (counterclockwise) to check Close the zipper, turn over the fabric, and then l baste the other side of the zipper to the fabric. 3 that the needle does not touch the presser foot. If a different stitch is selected or the needle hits the presser foot, the needle may bend or break. Sew the zipper to the piece of fabric with the i extra 3 mm (1/8 inch), starting from the base 1 of the zipper. CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. a Basting stitching Attach the presser foot holder to the other pin m of zipper foot "I". If the presser foot holder was attached to the right pin in step g, change it to the left pin. 1 I 2 a Pin on the left side b Needle drop point Zipper Insertion 97