Brother International Innov-ís 1200 Users Manual - English - Page 188
button is pressed
View all Brother International Innov-ís 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
APPENDIX Symptom Probable Cause Remedy Reference The sewing lamp The sewing lamp is damaged. does not come on. The machine is not turned on. Contact your retailer or the nearest authorized service center. Turn on the machine. - page 17 Nothing appears in the LCD. The brightness of the LCD is either too light or too dark. Adjust the brightness of the LCD. page 190 Machine does not operate when button is pressed. An animation is displayed on the LCD. Touch the LCD with your finger, and the animation will disappear. page 18 Embroidery unit does not move. No pattern selected. The embroidery unit is not set up correctly. Select a pattern. Set the embroidery unit up correctly. page 157 page 148 The fabric is not fully stretched on the embroidery frame. The fabric is loose. Stretch the fabric properly on the embroidery frame. page 152 No stabilizer material is attached. Always use stabilizer material for embroidery with stretch fabrics, thin fabrics, fabrics with a loose weave and fabrics where stitches easily contract. page 151 The thread is tangled and the bobbin case, etc., is plugged up. Remove the tangled thread. When the bobbin case is plugged up, clean the race. page 180 The thread tension is incorrect. Adjust the tension of the upper thread. page 171 Embroidery not neatly done. Objects are placed near the carriage or embroidery frame. If the embroidery unit carriage or embroidery frame bumps into objects, the pattern will be misaligned. Do not place objects within the range of embroidery frame motion. page 149 Stretch the fabric on the frame once Material coming out of the again so that the material coming out embroidery frame is causing of the embroidery frame does not - problems. cause problems, rotate the pattern and embroider. A heavy fabric is being embroidered, and the fabric is hanging off the table. If embroidery is done with the fabric hanging off the table, the embroidery unit movement will be impaired. Support the fabric while embroidering. - The fabric is catching. It is pinched. Stop the sewing machine and set the fabric up correctly. - The carriage was moved while the If the carriage is moved during the embroidery frame was being removed or attached during process, the pattern may be misaligned. Be careful when removing or - embroidery. attaching the embroidery frame. 186