Brother International MFC-790CW Users Manual - English - Page 111

Making copies Making multiple copies 12 You can make up to 99 copies. a Press (Copy). b Load your document. (See Loading documents on page 21.) c Enter the number of copies you want. d Press Black Start or Color Start. Note To sort the copies, press d or c to choose Stack/Sort. (See Sorting copies using the ADF on page 98.) Stop copying 12 To stop copying, press Stop/Exit. Copy settings 12 You can change the copy settings temporarily for the next copy. These settings are temporary, and the machine returns to its default settings 1 minute after copying, unless you have set the Mode Timer to 30 seconds or less. (See Mode Timer on page 25.) If you are finished choosing settings, press Black Start or Color Start. If you want to choose more settings, press d or c. Note You can save some of the settings that you use most often by setting them as a favorite (up to three can be saved). These settings will stay until you change them again. (See Setting your favorites on page 101.) Changing copy quality 12 You can choose from a range of quality. The factory setting is Normal. „ Fast Fast copy speed and lowest amount of ink used. Use to save time printing documents to be proof-read, large documents or many copies. 12 „ Normal Normal is the recommended mode for ordinary printouts. This produces good copy quality with good copy speed. „ Best Use best mode to copy precise images such as photographs. This provides the highest resolution and slowest speed. a Press (Copy). b Load your document. 95