Brother International MFC-790CW Users Manual - English - Page 90
Using a Non-Brother cordless external telephone (MFC-790CW only), Using remote codes, Fax Receive code
UPC - 012502620501
View all Brother International MFC-790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Chapter 7 Using a Non-Brother cordless external telephone (MFC-790CW only) 7 If your non-Brother cordless telephone is connected to the EXT. jack of the machine and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay. If you let the machine answer first, you will have to go to the machine so you can press Speaker Phone to send the call to the cordless handset. Using remote codes 7 Fax Receive code 7 If you answer a fax call on an extension or external telephone, you can tell your machine to receive it by dialing the Fax Receive Code l 5 1. Wait for the chirping sounds then replace the handset. (See Easy Receive on page 49.) Your caller will have to press Start to send the fax. If you answer a fax call at the machine's handset or an external telephone connected to the EXT. jack of the machine, you can make the machine receive the fax by pressing Black Start. Telephone Answer code 7 If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T (double) Ring after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T Ring off by pressing # 5 1 (make sure you press this between the rings). If the machine answers a voice call and pseudo/double-rings for you to take over, you can take the call at the machine's handset by pressing Speaker Phone. Changing the remote codes 7 The preset Fax Receive Code is l 5 1. The preset Telephone Answer Code is # 5 1. If you want to, you can replace them with your own codes. a Press MENU. b Press a or b to display Fax. c Press Fax. d Press a or b to display Setup Receive. e Press Setup Receive. f Press a or b to display Remote Codes. g Press Remote Codes. h Press On (or Off). i Do one of the following. If you want to change the Fax Receive Code, enter the new code. Press OK, go to step k. If you do not want to change the Fax Receive Code, press OK, go to step j. j Do one of the following. If you want to change the Telephone Answer Code, enter the new code. Press OK, go to step k. If you do not want to change the Telephone Answer Code, press OK, go to step k. k Press Stop/Exit. Note • If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code and Telephone Answer Code to another threedigit code (such as # # # and 9 9 9). • Remote Codes might not work with some telephone systems. 74