Brother International MFC-790CW Users Manual - English - Page 56

Chapter 5 Additional sending operations 5 Sending faxes using multiple settings 5 When you send a fax you can choose any combination of these settings: resolution, contrast, scan size, overseas mode, delayed fax timer, polling transmission and real time transmission. a Press (Fax). The LCD shows: FAX/TEL Fax Resolution Standard Contrast Auto Broadcasting Off History Speed Dial b Press d or c to display a setting you want to change and press the setting, then press the option you want. c Repeat step b to change more settings. Note • Most settings are temporary and the machine returns to its default settings after you send a fax. • You can save some of the settings you use most often by setting them as default. These settings will stay until you change them again. (See Setting your changes as the new default on page 43.) Contrast 5 If your document is very light or very dark, you may want to change the contrast. For most documents the factory setting Auto can be used. It automatically chooses the suitable contrast for your document. Use Light when sending a light document. Use Dark when sending a dark document. a Press (Fax). b Press d or c to display Contrast. c Press Contrast. d Press Auto, Light or Dark. Note Even if you choose Light or Dark, the machine will send the fax using the Auto setting in any of the following conditions: • When you send a color fax. • When you choose Photo as the Fax Resolution. 40