Brother International MFC-790CW Users Manual - English - Page 67

Receiving a Fax Paging 6 When you choose Paging, your machine dials the pager number you have programmed, and then dials your PIN (Personal Identification Number). This activates your pager so you will know that you have a fax message in the memory. If you have set Paging, a backup copy of the received fax will automatically be printed at the machine. a Press MENU. b Press a or b to display Fax. c Press Fax. d Press a or b to display Setup Receive. e Press Setup Receive. f Press a or b to display Memory Receive. g Press Memory Receive. h Press Paging. i Enter your pager phone number followed by # # (up to 20 digits) using the buttons on the LCD. Press OK. Do not include the area code if it is the same as that of your machine. For example, press: 1 8 0 0 5 5 5 1 2 3 4 # #. j Do one of the following: „ If your pager needs a PIN, enter the PIN, press #, press Pause, and then enter your fax number followed by # # using the buttons on the LCD. Press OK. For example, press: 1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7 8 9 # # „ If you do not need a PIN, press: Pause, and then enter your fax number followed by # # using the buttons on the LCD. Press OK. For example, press: Pause 1 8 0 0 5 5 5 6 7 8 9 # # k Press Stop/Exit. Note • You cannot change a paging number or PIN remotely. • If Paging is turned on your machine cannot receive a color fax unless the sending machine converts it to black & white. 6 • If you want to be paged for voice messages, make sure you pressed MC on/off key to turn the Message Center on. 51