Brother International MFC-790CW Users Manual - English - Page 54
How to preview an outgoing fax, Canceling a fax in progress, Black Start, Stop/Exit
UPC - 012502620501
View all Brother International MFC-790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 5 How to preview an outgoing fax 5 You can preview a fax message before you send it. You must set the Real Time Transmission and Polling RX to off before you use this feature. (See Real time transmission on page 41 and Polling receive on page 90.) a Press (Fax). b Press d or c to display Preview. c Press Preview. d Press On. e Load the document. f Enter the fax number using the dial pad. You can also enter the fax number by pressing Speed Dial. Then, press a or b to display the number you want, press the number to choose it, and then press Send a fax. g Press Black Start. The machine starts scanning the document and the outgoing fax appears on the LCD. When the fax is displayed, press MENU and the following buttons will appear on the LCD. Press the button you want to use to perform an operation. Button or or d c Description Enlarge the fax. Reduce the fax. Scroll vertically. Scroll horizontally. Rotate the fax clockwise. Go back to the previous page. Go to the next page. Close the preview table. Note The fax message in the memory will be sent and then erased when you press Black Start. h Press Black Start. Canceling a fax in progress 5 If you want to cancel a fax while the machine is scanning, dialing or sending, press Stop/Exit. 38