Canon PIXMA MP280 On-Screen Manual - Page 641

Message Appears on the Computer Screen Page 641 of 707 pages Advanced Guide > Troubleshooting > Message Appears on the Computer Screen U331 Message Appears on the Computer Screen Error Number: B200 A printer error has occurred. Turn the printer off and unplug the power cord of the printer from the power supply. Then contact the service center. Is Displayed Error Number: **** A printer error has occurred. Turn the printer off and then on again. If this doesn't clear the error, see the user's guide for more detail. Is Displayed Error Regarding the Power Cord Being Unplugged Is Displayed Writing Error/Output Error/Communication Error Other Error Messages The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed Error Number: B200 A printer error has occurred. Turn the printer off and unplug the power cord of the printer from the power supply. Then contact the service center. Is Displayed Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center. Error Number: **** A printer error has occurred. Turn the printer off and then on again. If this doesn't clear the error, see the user's guide for more detail. Is Displayed "****" is displayed in the alphanumeric character and depends on the error occurred. 5100 Is Displayed Confirm the movement of the FINE Cartridge Holder blocked. Cancel printing from your computer, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE Cartridge Holder from moving, and turn on the machine again. Important Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it. If the problem is not resolved, contact the service center. Four-Digit Alphanumeric and "Printer error has occurred." Is Displayed Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center. Error Regarding the Power Cord Being Unplugged Is Displayed The power cord may have been unplugged while the machine was still on. Check the error message that appears on the computer, then click OK. The machine starts printing. See Notice for Unplugging the Power Cord for unplugging the power cord. Writing Error/Output Error/Communication Error Check 1: If the POWER lamp is off, make sure that the power plug is plugged in, then turn the machine on. While the POWER lamp is flashing green, the machine is initializing. Wait until the POWER