Canon imageCLASS 2300 Reference Guide for imageCLASS 2300 - Page 92
Press [F2] - or [F3] + to select the desired time period, press [OK].
View all Canon imageCLASS 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
G If you want to use the Auto Clear function: ❑ Select , and proceed to step 4. G If you do not want to use the Auto Clear function: ❑ Select , and proceed to step 5. F2 4 Press [F2] (-) or [F3] (+) to select the desired time period © F3 press [OK]. OK The Auto Clear Time settings are from 1 to 9 minutes (in one minute increments). You can also enter values using the numeric keys. 3 Selecting and Storing Settings The TIMER SETTINGS menu returns. Reset 5 Press [Reset] to return to the Basic Features screen. Energy Saver Mode If the machine is not used (no keys are pressed) for a certain period of time, it enters the Energy Saver mode. You can specify the amount of time taken before entering the Energy Saver mode from 3 to 30 minutes. You can also set the Energy Saver to '02 OFF'. NOTE The default setting is '01 ON' and '15MIN'. To reactivate the machine from the Energy Saver mode, press (Energy Saver). To enter the Energy Saver mode manually, press (Energy Saver) for more than 2 seconds. You can select the power consumption in the Energy Saver mode between two levels using the Additional Functions menu. (See "Power Consumption in the Energy Saver Mode," on p. 3-13.) If the Energy Saver and Daily Timer modes are both set, the Daily Timer settings have priority. The machine will not enter the Energy Saver mode when: - The machine is in operation - A document is in the feeder - All paper drawers are empty - There is jammed paper in the machine Timer Settings 3-25