Cisco 10720 Configuration Guide - Page 137

Chapter 5 Maintaining the Cisco 10720 Internet Router Removing and Installing the Router Chassis Cover Caution Replace the cover after completing any maintenance task on the router. This reduces the chance of damage to the router components while the router is not in service. Installing the Router Cover To replace the router cover, perform the following steps: Tip If you are right-handed, face the router so the front is on your left and the back is on your right side. This position lets you align the cover and the router chassis more easily. Reverse the position of the router if you are left-handed. Figure 5-16 Positioning the Cover in the Router 1 57671 1 Router chassis cover Step 1 Step 2 Arrange the router so that you face a side panel. (See Figure 5-17.) Place the router cover over the router and align the front edge of the router cover with the front lip of the router chassis. Slide the cover down and forward until the router cover is firmly seated under the front lip of the router chassis. Lower the back of the cover to close the router. (See Figure 5-16.) 78-13062-10 Cisco 10720 Internet Router Installation and Configuration Guide 5-15