Cisco 10720 Configuration Guide - Page 62
Connecting Ports on the Uplink Cards
View all Cisco 10720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Connecting Ports on the Uplink Cards Chapter 3 Installing the Cisco 10720 Internet Router Note The fiber-optic connectors must be free of dust, oil, and other contaminants. Carefully clean the fiber-optic connectors using a fiber cleaning kit. See the Inspection and Cleaning Procedures for Fiber Optic Connections document for specific information and instructions. Figure 3-12 Simplex Optical Cable 57834 Figure 3-13 Duplex Optical Cable 57653 Attach either one duplex optical cable or two simplex optical cables between the card and the device to which the card is connected. (See Figure 3-16.) Connecting Ports on the Uplink Cards Before connecting the ports on an uplink card, install the cable-management tray. For more information, see the "Removing and Installing the Cable-Management System" section on page 5-68. For cable and connection specifications, refer to the Cisco 10720 Internet Router Uplink Cards Installation and Configuration publication. 3-12 Cisco 10720 Internet Router Installation and Configuration Guide 78-13062-10