Cisco 10720 Configuration Guide - Page 162
Removing the Air Baffle Separator, Step 10
View all Cisco 10720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Removing and Installing the AC or Dual DC Power Supply Chapter 5 Maintaining the Cisco 10720 Internet Router Step 10 Disconnect the following power connectors from the main board: (See Figure 5-41.) a. 4-jack harness b. 6-pin connector c. 2-pin +/-12V connector Figure 5-42 Removing the Air Baffle Separator 57810 Step 11 Lift the air baffle separator out of the chassis. (See Figure 5-42.) Step 12 Place the 4-jack harness behind the power supply before lifting it out. Note Avoid disturbing the fan assembly by placing the 4-jack harness behind the power supply after it is removed from the main board. Do this before lifting the power supply from the router chassis. 5-40 Cisco 10720 Internet Router Installation and Configuration Guide 78-13062-10