Cisco RV042 Administration Guide - Page 124

VPN Introduction to VPNs 9 You will need to configure this router with the specific IPsec policies required for the IPsec client. You also will need to install and configure the IPsec client software on the users' computers. NOTE Consider two other remote access options: Remote Access with Cisco QuickVPN, page 125 and Remote Access with PPTP, page 125. The following is an example of a client-to-gateway VPN. A business traveler connects to the Internet from her hotel room. Her notebook computer has VPN client software that is configured with her office's VPN settings. She accesses the VPN client software and connects to the VPN router at the central office. Using the VPN, she now has a secure connection to the central office's network, as if she were physically connected. DNS Server Internal network Inside 192.168.1.1 RV0xx router Outside 209.165.200.226 Personal Computer Using VPN Software Client Internet Personal Computer Using VPN Software Client 199469 WINS Server 192.168.1.30 Personal Computer Using VPN Software Client Configuration tasks: 1. Use the VPN > Client to Gateway page to configure the VPN tunnel with the settings required by the third-party client, such as TheGreenbow. For instructions, see Setting Up a Remote Access Tunnel for VPN Clients (Client To Gateway), page 139. 2. Install the client software on the users' computers. Cisco Small Business RV0xx Series Routers Administration Guide 124