Cisco RV042 Administration Guide - Page 169

Cisco QuickVPN for Windows Using the Cisco QuickVPN Software C • Server Address: Enter the WAN IP address or domain name of the remote router. • Port for QuickVPN: Enter the port number that the QuickVPN client will use to communicate with the remote VPN router, or keep the default, Auto. • Use Remote DNS Server: When this feature is enabled, QuickVPN users use the Remote DNS Server (provided by the QuickVPN Server) to resolve the hostname of the computers in the remote subnet over a QuickVPN tunnel. STEP 3 To save this profile, click Save. If there are multiple sites to which you will need to create a tunnel, you can create multiple profiles, but note that only one tunnel can be active at a time. To delete this profile, click Delete. For information, click Help. STEP 4 To begin your QuickVPN connection, click Connect. The connection's progress is displayed in this order: Connecting, Provisioning, Activating Policy, and Verifying Network. STEP 5 When your QuickVPN connection is established, the QuickVPN tray icon turns green, and the QuickVPN Status page appears. The page displays the IP address of the remote end of the VPN tunnel, the time and date the VPN tunnel began, and the total length of time the VPN tunnel has been active. STEP 6 To terminate the VPN tunnel, click Disconnect. If you clicked Change Password and have permission to change your own password, the Connect Virtual Private Connection page appears. • Old Password: Enter your password. • New Password: Enter your new password. • Confirm New Password: Re-enter your new password. STEP 7 Click OK to save your new password. Click Cancel to cancel your change. For information, click Help. NOTE You can change your password only if you have been granted that privilege by your system administrator. Cisco Small Business RV0xx Series Routers Administration Guide 169