Cisco WRV210 Administration Guide - Page 56
Firewall > DMZ, Software DMZ, Enabled, Disabled, Cancel, and saving
View all Cisco WRV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Configuring the Firewall Configuring a DMZ to Allow Access to All Ports of a Server 4 STEP 1 Click Firewall > DMZ in the navigation tree. STEP 2 In the Software DMZ, click Enabled. NOTE You can disable a DMZ at any time by clicking Disabled and saving the settings. STEP 3 Enter the IP address of the PC that hosts the service that you want to expose to Internet traffic. STEP 4 Click Save to save your settings, or click Cancel to refresh the page with the previously saved settings. Cisco Small Business WRV210 Administration Guide 56
Configuring the Firewall
Configuring a DMZ to Allow Access to All Ports of a Server
Cisco Small Business WRV210 Administration Guide
56
4
STEP 1
Click
Firewall > DMZ
in the navigation tree.
STEP
2
In the
Software DMZ
, click
Enabled
.
NOTE
You can disable a DMZ at any time by clicking
Disabled
and saving the
settings.
STEP
3
Enter the IP address of the PC that hosts the service that you want to expose to
Internet traffic.
STEP
4
Click
Save
to save your settings, or click
Cancel
to refresh the page with the
previously saved settings.