Cisco WRV210 Administration Guide - Page 60
Status, Enabled, Disabled, Enter Policy Name, Start IP Address, End IP Address, URL String, Cancel
View all Cisco WRV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Configuring the Firewall Blocking Web Access with URL Filtering 4 STEP 3 Enter the following settings for the chosen policy: • Status: Click Enabled to enable the policy, or click Disabled to disable it. Policies are disabled by default. • Enter Policy Name: Type a name to identify the policy. After you save the policy, this name will appear with the policy number in the Internet Access Policy drop-down list. • Start IP Address and End IP Address: Enter the IP address of the PCs that are subject to this policy. STEP 4 In the URL String field, enter the URL of the Internet site to block. NOTE You can enter part of a URL, such as yahoo, to filter all URLs that contain that string, or you can enter the full URL, such as www.yahoo.com, to block only the specific URL as entered. STEP 5 Click Save to save your settings, or click Cancel to refresh the page with the previously saved settings. Cisco Small Business WRV210 Administration Guide 60