Cisco WRV210 Administration Guide - Page 84
Configuring SNMP Settings for Status Reporting, Remote Management Port, Cancel
View all Cisco WRV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Administration Managing Access and Configuring Other Management Options 7 • Remote Management Port: Enter the port number that is open to outside access. The default setting is 8080. STEP 4 Click Save to save your settings, or click Cancel to refresh the page with the previously saved settings. Configuring SNMP Settings for Status Reporting SNMP, Simple Network Management Protocol, is a network protocol that provides network administrators with the ability to monitor the status of the Router and receive notification of any critical events as they occur on the network. Configure this feature in the SNMP section of the Administration > Management page. STEP 1 Click Administration > Management in the navigation tree. STEP 2 In the SNMP section, configure the following settings: • SNMP: To enable SNMP, check the Enabled box. To disable this feature, click Disabled. • SNMP: Select Enable if you wish to use SNMP. To use SNMP, you need SNMP software on your PC. • Contact: Enter the contact information for the Router. Cisco Small Business WRV210 Administration Guide 84