Cisco WS-C2960S-24TS-S Hardware Installation Guide - Page 87

Connector and Cable Specifications, 10/100/1000 Ports

Get Cisco WS-C2960S-24TS-S PDF manuals and user guides View all Cisco WS-C2960S-24TS-S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

B A P P E N D I X Connector and Cable Specifications This appendix describes the Catalyst 2960 switch ports and the cables and adapters that you use to connect the switch to other devices and includes these sections: • Connector Specifications, page B-1 • Cable and Adapter Specifications, page B-4 Connector Specifications These sections describe the connectors used with the Catalyst 2960 switch: • 10/100/1000 Ports, page B-1 • SFP Module Ports, page B-3 • Dual-Purpose Ports, page B-3 • Console Port, page B-4 10/100/1000 Ports The 10/100/1000 Ethernet ports on the Catalyst 2960 switch use standard RJ-45 connectors. Figure B-1 shows the pinout. Note The auto-MDIX feature is enabled by default. For configuration information for this feature, see the switch software configuration guide or the switch command reference. Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices When connecting the ports to 10BASE-T- and 100BASE-TX-compatible devices, such as servers, workstations, and routers, you can use a two or four twisted-pair, straight-through cable wired for 10BASE-T and 100BASE-TX. Figure B-5 shows the two twisted-pair, straight-through cable schematics. Figure B-7 shows the four twisted-pair, straight-through cable schematics. OL-7075-09 Catalyst 2960 Switch Hardware Installation Guide B-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
B-1
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
APPENDIX
B
Connector and Cable Specifications
This appendix describes the Catalyst 2960 switch ports and the cables and adapters that you use to
connect the switch to other devices and includes these sections:
•
Connector Specifications, page B-1
•
Cable and Adapter Specifications, page B-4
Connector Specifications
These sections describe the connectors used with the Catalyst 2960 switch:
•
10/100/1000 Ports, page B-1
•
SFP Module Ports, page B-3
•
Dual-Purpose Ports, page B-3
•
Console Port, page B-4
10/100/1000 Ports
The 10/100/1000 Ethernet ports on the Catalyst 2960 switch use standard RJ-45 connectors.
Figure B-1
shows the pinout.
Note
The auto-MDIX feature is enabled by default. For configuration information for this feature, see the
switch software configuration guide or the switch command reference.
Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices
When connecting the ports to 10BASE-T- and 100BASE-TX-compatible devices, such as servers,
workstations, and routers, you can use a two or four twisted-pair, straight-through cable wired for
10BASE-T and 100BASE-TX.
Figure B-5
shows the two twisted-pair, straight-through cable
schematics.
Figure B-7
shows the four twisted-pair, straight-through cable schematics.