Cisco WS-C2960S-24TS-S Hardware Installation Guide - Page 93
Crossover Cable and Adapter Pinouts, Identifying a Crossover Cable
View all Cisco WS-C2960S-24TS-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Appendix B Connector and Cable Specifications Cable and Adapter Specifications Figure B-8 Switch 1 TP0+ 2 TP03 TP1+ 6 TP1- 4 TP2+ 5 TP27 TP3+ 8 TP3- 65274 Four Twisted-Pair Crossover Cable Schematics for 10/100/1000 Ports Switch 1 TP0+ 2 TP03 TP1+ 6 TP1- 4 TP2+ 5 TP27 TP3+ 8 TP3- Crossover Cable and Adapter Pinouts This section describes how to identify a crossover cable and also describes the adapter pinouts. Identifying a Crossover Cable To identify a crossover cable, compare the two modular ends of the cable. Hold the cable ends side-by-side, with the tab at the back. The wire connected to the pin on the outside of the left plug should be a different color from the wire connected to the pin on the inside of the right plug. (See Figure B-9.) Figure B-9 Pin 1 Identifying a Crossover Cable Pin 1 on one connector and pin 1 on the other connector should be different colors. Pin 1 200915 OL-7075-09 Catalyst 2960 Switch Hardware Installation Guide B-7