D-Link DES-3010PA-TAA CLI Guide - Page 178
traffic-shape, D-Link DES-3010FA/GA/PA CLI Reference Guide, Syntax, Parameters, Command Mode
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide traffic-shape The traffic-shape Interface configuration (Ethernet, Port-Channel) mode command activates the traffic shaper on egress ports or egress queues. Use the no form of this command to disable the shaper. Syntax traffic-shape { committed-rate } [queue-id] no traffic-shape [queue-id] Parameters • committed-rate - The average traffic rate (CIR) in bits per second(bps). Range:64-256000 • queue-id - [optional] Assign shaper to the specified queue. Range:4096-16769020 • no traffic-shape - disable the shaper on the interface, or use queue-id to disable the shaper on the specified queue. Command Mode Interface configuration (Ethernet, Port-Channel). Usage guidelines Use this command in interface configuration mode to activate the shaper on egress port or egress queue. For egress port, enter the interface configuration mode with the port number, and use traffic-shape without the queue-id option; the CIR is applied on the specified port. To activate shaper for specific queue, add the queue id to the line. Default value No shape is defined. Page 177