D-Link DES-3010PA-TAA CLI Guide - Page 309
switchport general allowed vlan, tagged, remove
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
VLAN Commands switchport general allowed vlan The switchport general allowed vlan Interface Configuration mode command adds or removes VLANs from a general port. Syntax switchport general allowed vlan add vlan-list | all [tagged | untagged] switchport general allowed vlan remove vlan-list | all all - Specify all existing IEEE 802.1 VLANs. Parameters • add vlan-list - Specifies the list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • remove vlan-list - Specifies the list of VLAN IDs to be removed. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • tagged - Indicates that the port transmits tagged packets for the VLANs. • untagged - Indicates that the port transmits untagged packets for the VLANs. Default Configuration If the port is added to a VLAN without specifying tagged or untagged, the default setting is tagged. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines This command enables changing the egress rule (e.g., from tagged to untagged) without first removing the VLAN from the list. Example The following example adds VLANs 2, 5, and 6 to the allowed list of Ethernet port 6 . Console(config)# interface ethernet 6 Console(config-if)# switchport mode general Console(config-if)# switchport general allowed vlan add 2,5-6 tagged Page 308