D-Link DES-3010PA-TAA CLI Guide - Page 218

D-Link DES-3010FA/GA/PA CLI Reference Guide snmp-server view The snmp-server view Global Configuration mode command creates or updates a Simple Network Management Protocol (SNMP) server view entry. To remove a specified SNMP server view entry, use the no form of this command. Syntax snmp-server view view-name oid-tree {included | excluded} no snmp-server view view-name [oid-tree] Parameters • view-name-Specifies the label for the view record that is being created or updated. The name is used to ref- erence the record. (Range: 1-30 characters) • oid-tree-Specifies the object identifier of the ASN.1 subtree to be included or excluded from the view. To identify the subtree, specify a text string consisting of numbers, such as 1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*) wildcard to specify a subtree family; for example 1.3.*.4. • included-Indicates that the view type is included. • excluded-Indicates that the view type is excluded. Default Configuration No view entry exists. Command Mode Global Configuration mode User Guidelines This command can be entered multiple times for the same view record. The number of views is limited to 64. No check is made to determine that a MIB node corresponds to the "starting portion" of the OID until the first wildcard. Examples The following example creates a view that includes all objects in the MIB-II system group except for sysServices (System 7) and all objects for interface 1 in the MIB-II interface group. Console(config)# snmp-server view user-view system included Console(config)# snmp-server view user-view system.7 excluded Console(config)# snmp-server view user-view ifEntry.*.1 included Page 217