D-Link DES-3010PA-TAA CLI Guide - Page 308
switchport trunk native vlan
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide switchport trunk native vlan The switchport trunk native vlan Interface Configuration mode command defines the native VLAN when the interface is in trunk mode. To return to the default configuration, use the no form of this command. Syntax switchport trunk native vlan vlan-id no switchport trunk native vlan Parameters • vlan-id- Specifies the ID of the native VLAN. Default Configuration VID=1. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines The command adds the port as a member of the VLAN. If the port is already a member of a VLAN (Native or otherwise), the last VLAN that the port was added to will automatically become it's native VLAN. The command adds the port as a member in native VLAN 2. if the port is already as a native VLAN 3 it will change automatically the lest entry (VLAN 2),only one native vlan can be in port. . Example The following example configures VLAN number 123 as the native VLAN when Ethernet port 6 is in trunk mode. Console(config)# interface ethernet 6 Console(config-if)# switchport mode trunk Console(config-if)# switchport trunk native vlan 123 Page 307