D-Link DES-3010PA-TAA CLI Guide - Page 340
dot1x timeout supp-timeout
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide dot1x timeout supp-timeout The dot1x timeout supp-timeout Interface Configuration mode command sets the time for the retransmission of an Extensible Authentication Protocol (EAP)-request frame to the client. To return to the default configuration, use the no form of this command. Syntax dot1x timeout supp-timeout seconds no dot1x timeout supp-timeout Parameters • seconds - Time in seconds that the device waits for a response to an EAP-request frame from the client before resending the request. (Range: 1- 65535 seconds) Default Configuration Default timeout period is 30 seconds. Command Mode Interface configuration (Ethernet) mode User Guidelines The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers. Examples The following example sets the timeout period before retransmitting an EAP-request frame to the client to 3600 seconds. Console(config)# interface ethernet 6 Console(config-if)# dot1x timeout supp-timeout 3600 Page 339