D-Link DES-3010PA-TAA CLI Guide - Page 74
interface range ethernet
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide interface range ethernet The interface range ethernet Global Configuration mode command configures multiple Ethernet type interfaces at the same time. Syntax interface range ethernet {port-range | all} Parameters • port-list - List of valid ports. Where more than one port is listed, separate nonconsecutive ports with a comma and no spaces, use a hyphen to designate a range of ports and group a list separated by commas in brackets. • all - All Ethernet ports. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines Commands under the interface range context are executed independently on each active interface in the range. If the command returns an error on one of the active interfaces, it does not stop executing commands on other active interfaces. Example The following example shows how ports 1 to 5 and 6 to 8 are grouped to receive the same command. Console(config)# interface range ethernet 1-5, 6-8 Console(config-if)# Page 73