D-Link DES-3010PA-TAA CLI Guide - Page 331

802.1x Commands Section 27. 802.1x Commands aaa authentication dot1x The aaa authentication dot1x Global Configuration mode command specifies one or more authentication, authorization, and accounting (AAA) methods for use on interfaces running IEEE 802.1X. To return to the default configuration, use the no form of this command. Syntax aaa authentication dot1x default method1 [method2...] no aaa authentication dot1x default Parameters • method1 [method2...] - At least one from the following table: Keyword Radius None Description Uses the list of all RADIUS servers for authentication Uses no authentication Default Configuration No authentication method is defined. Command Mode Global Configuration mode User Guidelines Additional methods of authentication are used only if the previous method returns an error and not if the request for authentication is denied. To ensure that authentication succeeds even if all methods return an error, specify none as the final method in the command line. The RADIUS server must support MD-5 challenge and EAP type frames. Examples The following example uses the aaa authentication dot1x default command with no authentication. Console(config)# aaa authentication dot1x default none Page 330