D-Link DES-3010PA-TAA CLI Guide - Page 248
spanning-tree port-priority
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide spanning-tree port-priority The spanning-tree port-priority Interface Configuration mode command configures port priority. To return to the default configuration, use the no form of this command. Syntax spanning-tree port-priority priority no spanning-tree port-priority Parameters • priority - The priority of the port. (Range: 0 - 240 in multiples of 16). Allowed values are :0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 Default Configuration The default port priority for IEEE Spanning TreeProtocol (STP) is 128. Command Modes Interface Configuration (Ethernet, port-channel) mode User Guidelines There are no user guidelines for this command. Example The following example configures the spanning priority on Ethernet port 3 to 16. Console(config)# interface ethernet 3 Console(config-if)# spanning-tree port-priority 16 Page 247