D-Link DES-3010PA-TAA CLI Guide - Page 314
ip internal-usage-vlan
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide ip internal-usage-vlan The ip internal-usage-vlan Interface Configuration mode command reserves a VLAN as the internal usage VLAN of an interface. To return to the default configuration, use the no form of this command. Syntax ip internal-usage-vlan vlan-id no ip internal-usage-vlan Parameters • vlan-id - Specifies the ID of the internal usage VLAN. Default Configuration The software reserves a VLAN as the internal usage VLAN of an interface. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines An internal usage VLAN is required when an IP interface is configured on an Ethernet port or port-channel. This command enables the user to configure the internal usage VLAN of a port. If an internal usage VLAN is not configured and the user wants to configure an IP interface, an unused VLAN is selected by the software. If the software selected a VLAN for internal use and the user wants to use that VLAN as a static or dynamic VLAN, the user should do one of the following: • Remove the IP interface. • Create the VLAN and recreate the IP interface. • Use this command to explicitly configure a different VLAN as the internal usage VLAN. Example The following example reserves an unused VLAN as the internal usage VLAN of ethernet port 7. Console# config Console(config)# interface ethernet 7 Console(config-if)# ip internal-usage-vlan 2 Page 313