D-Link DES-3010PA-TAA CLI Guide - Page 301
private-vlan isolated, interface range vlan
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
VLAN Commands private-vlan isolated The private-vlan isolated Interface Configuration (VLAN) mode command configures the isolated VLAN of the PVLAN. To return to the default configuration, use the no form of this command. Syntax private-vlan isolated vlan-id no private-vlan isolated Parameters • vlan-id - Specifies the ID of the isolated VLAN. Default Configuration No VLAN is configured. Command Mode Interface Configuration (VLAN) mode User Guidelines • This command creates an isolated VLAN and associates it with the primary VLAN. • The command is executed in the context of the primary VLAN. • An isolated VLAN can only be associated with one primary VLAN. • A VLAN that has been configured as an isolated VLAN cannot be configured as a primary or community VLAN. • The command is not supported under the command interface range vlan. Example This example configures VLAN 20 as the isolated VLAN of primary private VLAN 200. Console# config Console(config)# vlan database Console(config-vlan)# vlan 200 Console(config-vlan)# exit Console(config)# interface vlan 200 Console(config-if)# private-vlan primary Console(config-if)# private-vlan isolated 20 Page 300