D-Link DES-3010PA-TAA CLI Guide - Page 352
dot1x guest-vlan, dot1x guest-vlan enable
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 352 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide dot1x guest-vlan The dot1x guest-vlan Interface Configuration (VLAN) mode command defines a guest VLAN. To return to the default configuration, use the no form of this command. Syntax dot1x guest-vlan no dot1x guest-vlan Default Configuration No VLAN is defined as a guest VLAN. Command Mode Interface Configuration (VLAN) mode User Guidelines Use the dot1x guest-vlan enable Interface Configuration mode command to enable unauthorized users on an interface to access the guest VLAN. If the guest VLAN is defined and enabled, the port automatically joins the guest VLAN when the port is unauthorized and leaves it when the port becomes authorized. To be able to join or leave the guest VLAN, the port should not be a static member of the guest VLAN. Example The following example defines VLAN 2 as a guest VLAN. Console# Console# configure Console(config)# vlan database Console(config-vlan)# vlan 2 Console(config-vlan)# exit Console(config)# interface vlan 2 Console(config-if)# dot1x guest-vlan Page 351