D-Link DES-3010PA-TAA CLI Guide - Page 349
ADVANCED FEATURES, dot1x auth-not-req, 1x Commands, Syntax, Default Configuration, Command Mode
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
802.1x Commands ADVANCED FEATURES dot1x auth-not-req The dot1x auth-not-req Interface Configuration (VLAN) mode command enables unauthorized devices access to the VLAN. To disable access to the VLAN, use the no form of this command. Syntax dot1x auth-not-req no dot1x auth-not-req Default Configuration Access is enabled. Command Mode Interface Configuration (VLAN) mode User Guidelines An access port cannot be a member in an unauthenticated VLAN. The native VLAN of a trunk port cannot be an unauthenticated VLAN. For a general port, the PVID can be an unauthenticated VLAN (although only tagged packets would be accepted in the unauthorized state.) Examples The following example enables access to the VLAN to unauthorized devices. Console(config)# interface vlan 2 Console(config-if)# dot1x auth-not-req Page 348