D-Link DES-3010PA-TAA CLI Guide - Page 60
sntp unicast client enable, Global Configuration mode
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide sntp unicast client enable The sntp unicast client enable Global Configuration mode command enables the device to use the Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. To disable requesting and accepting SNTP traffic from servers, use the no form of this command. Syntax sntp unicast client enable no sntp unicast client enable Default Configuration The SNTP unicast client is disabled. Command Mode Global Configuration mode User Guidelines Use the sntp server Global Configuration mode command to define SNTP servers. Examples The following example enables the device to use the Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. Console(config)# sntp unicast client enable Page 59