D-Link DES-3010PA-TAA CLI Guide - Page 307
switchport trunk allowed vlan, Specify all existing IEEE 802.1 VLANs
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 307 highlights
VLAN Commands switchport trunk allowed vlan The switchport trunk allowed vlan Interface Configuration mode command adds or removes VLANs to or from a trunk port. Syntax switchport trunk allowed vlan {add vlan-list/all | remove vlan-list/all} all - Specify all existing IEEE 802.1 VLANs Parameters • add vlan-list - List of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • remove vlan-list - List of VLAN IDs to be removed. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. Default Configuration This command has no default configuration. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines There are no user guidelines for this command. Example The following example adds VLANs 1, 2, 5 to 6 to the allowed list of Ethernet port 6. Console(config)# interface ethernet 6 Console(config-if)# switchport mode trunk console(config-if)# switchport trunk allowed vlan add 1-2,5-6 Page 306