D-Link DES-3010PA-TAA CLI Guide - Page 310
switchport general pvid
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 310 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide switchport general pvid The switchport general pvid Interface Configuration mode command configures the PVID when the interface is in general mode. To return to the default configuration, use the no form of this command. Syntax switchport general pvid vlan-id no switchport general pvid Parameters • vlan-id - Specifies the PVID (Port VLAN ID). Default Configuration If the default VLAN is enabled, PVID = 1. Otherwise, PVID=4095. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines There are no user guidelines for this command. Example The following example configures the PVID for Ethernet port 6, when the interface is in general mode. Console(config)# interface ethernet 6 Console(config-if)# switchport mode general Console(config-if)# switchport general pvid 234 Page 309