D-Link DES-3010PA-TAA CLI Guide - Page 338
dot1x timeout tx-period
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide dot1x timeout tx-period The dot1x timeout tx-period Interface Configuration mode command sets the number of seconds that the device waits for a response to an Extensible Authentication Protocol (EAP)-request/identity frame from the client before resending the request. To return to the default configuration, use the no form of this command. Syntax dot1x timeout tx-period seconds no dot1x timeout tx-period Parameters • seconds - Specifies the time in seconds that the device waits for a response to an EAP-request/identity frame from the client before resending the request. (Range: 1-65535 seconds) Default Configuration Timeout period is 30 seconds. Command Mode Interface Configuration (Ethernet) mode User Guidelines The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers. Examples The following command sets the number of seconds that the device waits for a response to an EAP-request/identity frame, to 3600 seconds. Console(config)# interface ethernet 6 Console(config-if)# dot1x timeout tx-period 3600 Page 337