D-Link DES-3010PA-TAA CLI Guide - Page 304
switchport access vlan, dynamic
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide switchport access vlan The switchport access vlan Interface Configuration mode command configures the VLAN ID when the interface is in access mode. To return to the default configuration, use the no form of this command. Syntax switchport access vlan {vlan-id | dynamic} no switchport access vlan Parameters • vlan-id - Specifies the ID of the VLAN to which the port is configured. • dynamic-Indicates that the port is assigned to a VLAN based on the source MAC address of the host con- nected to the port. Default Configuration All ports belong to VLAN 1. Command Mode Interface configuration (Ethernet, port-channel) mode User Guidelines The command automatically removes the port from the previous VLAN and adds it to the new VLAN. Example The following example configures a VLAN ID of 23 to the untagged layer 2 VLAN Ethernet port 6. Console(config)# interface ethernet 6 Console(config-if)# switchport access vlan 23 Page 303