D-Link DES-3226SM Product Manual - Page 8

Power on, Power Failure - des 3226 reset

Get D-Link DES-3226SM - 1000Mbps Ethernet Switch PDF manuals and user guides
UPC - 790069247118
View all D-Link DES-3226SM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

DES-3226S Layer 2 Fast Ethernet Switch User's Guide Power on The DES-3226S Switch can be used with AC power supply 100-240 VAC, 50 - 60 Hz. The power Switch is located at the rear of the unit adjacent to the AC power connector and the system fan. The Switch's power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected. After the power Switch is turned on, the LED indicators should respond as follows: • All LED indicators will momentarily blink. This blinking of the LED indicators represents a reset of the system • The power LED indicator is always on after the power is turned ON • The console LED indicator will blink while the Switch loads onboard software and performs a self-test. will remain ON if there is a connection at the RS-232 port, otherwise this LED indicator is OFF • The 100M LED indicator may remain ON or OFF depending on the transmission speed Power Failure As a precaution in the event of a power failure, unplug the Switch. When the power supply is restored, plug the Switch back in. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
5
Power on
The DES-3226S Switch can be used with AC power supply 100-240 VAC, 50 - 60 Hz. The power Switch is located at the rear
of the unit adjacent to the AC power connector and the system fan. The Switch’s power supply will adjust to the local power
source automatically and may be turned on without having any or all LAN segment cables connected.
After the power Switch is turned on, the LED indicators should respond as follows:
•
All LED indicators will momentarily blink. This blinking of the LED indicators represents a reset of the system
•
The power LED indicator is always on after the power is turned ON
•
The console LED indicator will blink while the Switch loads onboard software and performs a self-test. will remain ON if
there is a connection at the RS-232 port, otherwise this LED indicator is OFF
•
The 100M LED indicator may remain ON or OFF depending on the transmission speed
Power Failure
As a precaution in the event of a power failure, unplug the Switch.
When the power supply is restored, plug the Switch back
in.